Pine & Merry – Christmas Tree And Snowflake Window Stickers

Turn Plain Glass Into Christmas Magic

Picture your window glowing with pine trees and snow.

The rest of your home is dressed for the holidays — the window shouldn't be the one bare spot. 

Pine & Merry puts the whole look up in minutes. Each piece clings to glass on its own, with no glue and no tape.

Smooth it on, step back, and enjoy it.

Static cling holds the design to glass — no glue, no tape, no residue.

✓ Your windows join the holiday at last
The tree is up. The mantel is done. Now the glass gets its turn, with a pine-tree scene that catches the light all day.

✓ Up in minutes, not an afternoon
Peel the backing, press the piece to clean glass, smooth out the air. No ladder of tape rolls, no sticky corners, no cleanup after.

✓ Clings without a drop of glue
The PVC film grips smooth glass by static alone. That means you can lift a piece, move it two inches left, and set it back down.

✓ 7.87 × 11.81 inches of festive detail per piece
Big enough to read from the sidewalk, small enough to arrange across a pane however you like. Mix and match across windows, doors, or mirrors.

✓ Pack it away for next December
Lift it off at the end of the season and store it flat. Glass stays clean, and the design is ready to go back up next year.

What you get today

• Pine & Merry Christmas window cling
• A finished festive look on glass, doors, or mirrors
• Ready to apply — no glue, tape, or tools
• Lifts off clean at the end of the season
• Free tracked shipping
• 30-day money-back guarantee

Seasonal production run — once this batch sells out, restock pricing may change.

Bring a festive look to your windows with Pine & Merry while this limited-time offer is available.

Frequently asked questions

Will it stick to textured or frosted glass?
It works best on smooth, flat glass. Textured, frosted, or pebbled surfaces don't give the film enough contact, so the cling will be weak there.

Can I use it on a window with a screen or storm window?
Yes. Apply it to the inside of the glass so it faces out. That keeps it out of the rain and wind and helps it last all season.

What do I do if it stops clinging?
Rinse the piece under cool water, shake off the drops, and press it back on while slightly damp. That refreshes the grip without any glue.

Can I cut it to fit a smaller pane?
You can trim the film with scissors. Cut along the outside of a design so you don't slice through the artwork.

How to use

• Step 1: Clean the glass with glass cleaner and dry it fully. Dust and streaks are the main reason a cling won't hold.
• Step 2: Peel the piece off its backing sheet.
• Step 3: Press it to the glass, then smooth from the center out to push air bubbles to the edge. Takes about a minute per piece.
• Step 4: To remove, lift a corner with your fingernail and peel slowly. Store flat on the original backing sheet.

Specifications

• Size: 7.87 × 11.81 inches per piece
• Material: PVC static-cling film

In the box

• Pine & Merry Christmas window cling (1 set)